• Temperature range:  Ambient to 990℃
• Programmed rate : 0.1 – 300 ℃/min
  Balance resolution : 0.1ug
• Furnace: Nichromel
• Dimensions: 535mm(W) * 350mm(D) * 470mm (H)

– Wavelength range: 190 – 900 nm
– Spectral bandwidths: 0.2, 0.7 and 2.0 nm, dual height; motorized slit drive for automatic slit selection
– Automatic Lamp Selection : 8-lamp holder with built-in power supplies for HA and EDL.
– Graphite furnace Temperature: Ambient up to 3000 °C in steps of 10 °C

• 보유램프:  Mo, Pb, Cu, As, Mg, Cd, V, Se, Ni, Zn, Fe, Co, Cr, Mn, Zn

– Spectral Range : 7800 to 375 cm-1
– Spectral Resolution : 128 to 4 cm-1 standard, upgrades to 2 or 1 cm-1 available
– Source : Mid-infrared ceramic emitter
– Detector : DTGS User Replaceable
– Components : Laser, source, desiccant, detector, L mirrors and power supply

•    Observation nuclei: 1H/19F, 31P to 15N
•    Observation frequency: 1H: 400 MHz, 13C: 100 MHz
•    Sensitivity for 13C: >= 190 (ASTM)
•    Sensitivity for 1H: >=280 (0.1% ethyl benzene)
•    Variable temperature range: -100 to 180C (depending on the probe)

– Detection Limit : 400 attomolar of fluorescein solution in 0.1 M NaOH
– Signal-to-Noise Ratio : 20000:1
– Maximum Data Acquisition Rate : 1,000,000 data points per second
– Minimum Data Acquisition Rate : 1 point per 1000 seconds
– Emission Range: 185 nm to 680 nm (optional to 1010 nm)
– Light Source : 75 W xenon arc lamp standard (150 W to 1000 W available)
– Excitation Monochromator : Coma-aberration corrected, asymmetrical, excitation optimized, Czerny-Turner design
– Emission Monochromator : Coma-aberration corrected, asymmetrical, emission optimized, Czerny-Turner design
– Grating Turret : Triple-grating, backlash-free, software controlled turret
– Focal Length : 300 mm
– Excitation Grating : 1200 line/mm 300 nm blaze (other gratings available upon request)
– Emission Grating : 1200 line/mm 400 nm blaze (other gratings available upon request)
– Optional Grating : 75–2400 line/nm and holographic models available
– Stray Light Suppression : 7 x 10^-7
– Wavelength Accuracy : ± 0.3 nm
– Wavelength Repeatability : ± 0.02 nm
– Wavelength Resolution : 0.022 nm
– Slewing Speed : 200 nm per second

• * X-Ray generator:
  * Type: Cu
  * Maximum output: 3 kW
    – Tube current: 80 mA
    – Stability: < 0.005%
    – Goniometer:
  * Angle reproducibility: ±0.0001°
  * Scanning radius: 380 – 760 mm
  * Slew speed: 1500 ˚/min
• * Angular range (Theta) -5˚ to 40˚
  *  Angular range (2Theta) -10˚ to 60˚
• * Sample 
•    – powder: 
•    – film